Switched receptacle not working


You strip wire and push into hole in back of receptacle. Over time, movement of receptacle causes springs holding wire to lose their tension and receptacle quits working. Check surrounding receptacles also as they are wired in series, one receptacle feeds the next. Also, you may have a tripped ground fault receptacle causing this one not to work.It is not a seat belt flashing solenoid, it is probably a fault in the interlock circuit. I would first check the magnetic safety switch under the rear right hand side seat harness, make sure it is working with multimeter. Then check the switch underneath the seat. If the machine won't start when you are not seated then the seat switch is working. Jul 19, 2010 · I used to get annoyed EVERY TIME I vacuumed downstairs and turned the corner only to have the vacuum plug slip from the outlet. Not only is this frustrating, but it is also a fire hazard. Old outlets should be replaced for safety reasons (but, hey, I’m okay if you just want to change them to a pretty white outlet.) Changing Out an Old (UGLY ... 10% off Outlet Repair. Sarasota Bradenton, FL: You expect light switches and electrical outlets to work properly, but they don’t always cooperate. If your outlets or lights are not working, you can conduct a few troubleshooting steps to fix simple problems. My fireplace has a light-switch that turns it on (really, releases the gas, because the pilot light is already going). A couple of months back we noticed the switch would only work every couple of tries. I replaced the light switch and it worked fine for a couple of days but now it is not working entirely (ever). Being fairly new to homeownership I'm not sure whether this is a problem for an ...